Previous Article | Next Article ![]()
Clinical and Diagnostic Laboratory Immunology, November 2002, p. 1240-1247, Vol. 9, No. 6
1071-412X/02/$04.00+0 DOI: 10.1128/CDLI.9.6.1240-1247.2002
Copyright © 2002, American Society for Microbiology. All Rights Reserved.
David Kaplan,2 and Juliet Fuhrman1
Department of Biology,1 Department of Chemical and Biological Engineering, Biotechnology Center, Tufts University, Medford, Massachusetts 021552
Received 7 January 2002/ Returned for modification 30 June 2002/ Accepted 9 August 2002
|
|
|---|
|
|
|---|
Since its adjuvant activity was first described over 75 years ago (6), alum remains the only adjuvant approved for use in humans (5). Several potential adjuvants are in various stages of research and development including monophosphoryl lipid A (20), CpG oligonucleotides (25), saponins (26), and lipid vesicles (10). One of the most significant limitations to these preparations, besides their often severe side effects (24), are their structural constraints, where small modifications of the base structure result in either increased toxicity or decreased efficacy (15).
Emulsan is a complex extracellular acylated polysaccharide produced by the gram-negative bacterium Acinetobacter calcoaceticus, which is ubiquitous in nature and which is considered to be part of the normal human commensal load (3, 4). Emulsan has been extensively researched for its industrial applications as an emulsifier (7-9, 13, 21, 27, 28). This molecule is composed of an unbranched polysaccharide backbone with O-acyl and N-acyl bound fatty acid side chains. The polysaccharide backbone consists of three aminosugars, D-galactosamine, D-galactosaminouronic acid, and a dideoxydiaminohexose in the ratio 1:1:1 (2, 9). The fatty acid side chains range in length from 10 to 22 carbons and can represent from 5 to 23% (wt/wt) of the polymer. The emulsan amino groups are either acetylated or covalently linked by an amide bond to 3-hydroxybutyric acid (9). The combination of hydrophilic anionic sugar main chain repeat units and the hydrophobic side groups leads to the amphipathic behavior of emulsan and, therefore, its ability to form stable oil-in-water emulsions.
It has been demonstrated that the composition of the fatty acid side chains decorating the polysaccharide backbone of emulsan can be manipulated by changing the culture conditions of the A. calcoaceticus RAG-1 bacteria (7-9, 27). This, along with genetic manipulation (12), allows the generation of potentially hundreds of emulsan variants with regard to the fatty acid composition.
This family of polymers has structural similarities to bacterial lipopolysaccharide (LPS), which suggested that it might have proinflammatory activity. The polymeric nature of emulsan's polysaccharide backbone suggests that it might also share properties with chitin and chitosan derivatives that have demonstrated the ability to activate macrophages (16-18, 22). This study explores the ability of these polymers to activate the innate immune response and to serve as adjuvants for humoral immunity in a model hapten carrier system.
|
|
|---|
600 U per µg) in flat-bottom 96-well tissue culture plates. After 1 to 3 h of incubation at 37°C, medium was replaced with RPMI 1640 containing 2 µg of indomethacin/ml and incubated for 30 min. Medium containing indomethacin was replaced with fresh RPMI 1640 prior to stimulation. All media contained 50 µg of gentamicin (Cell-Gro, Herndon, Va.)/ml. Generation and culture of A. calcoaceticus RAG-1 mutants. A. calcoaceticus RAG-1 (ATCC 31012) was obtained from the American Type Culture Collection (Manassas, Va.). A. calcoaceticus RAG-1 transposon mutants 13D, 52D, 62C, and VRBS1, were generated with the mini-Tn10PttKm transposon (11, 12, 14). The parent strain and the RAG-1 transposon mutants were grown on minimal medium (0.1 M K2HPO4, 0.05 M KH2PO4, 2 mM MgSO4 · 7H2O, 0.03 M [NH4]2SO4) or Luria-Bertani (LB) broth supplemented with ethanol and undecanoic, myristic, palmitic, or stearic acid (1% [wt/vol]) as carbon sources in 500-ml baffled flasks each containing 100 ml of medium and incubated at 30°C in an orbital shaker (250 rpm) for 6 days. Emulsan variants were purified as previously described (7-9, 13, 21). Apoemulsan (protein-free emulsan) was produced by hot-phenol extraction (28). Emulsan was deacylated by basic hydrolysis for some experiments as previously described (9). Emulsan variants were analyzed by gas chromatography, gel permeation chromatography, and mass spectroscopy for fatty acid content and polysaccharide backbone length as previously described (2, 9, 12). Apoemulsan was used for all experiments unless otherwise noted.
Macrophage activation and cytokine assay. Macrophages (primary or cell lines) were stimulated with emulsan preparations at various concentrations for 12 to 16 h. RAW 264.7 cells were plated at 8 x 104 cells per well in 200 µl in a 96-well tissue culture plate and incubated for 48 h prior to stimulation. Resident peritoneal cells from a sterile lavage were plated at 2 x 105 cells/well in RPMI 1640 medium with 5% FCS in 96-well tissue culture plates. After 1 to 3 h of incubation at 37°C, the medium was replaced with RPMI 1640 containing 2 µg of indomethacin/ml and cells were incubated for 30 min prior to stimulation. Cell supernatants were collected for cytokine assays. Tumor necrosis factor (TNF) was measured by either the L929 cytotoxicity assay or by enzyme-linked immunosorbent assay (ELISA; Genzyme, Cambridge, Mass., and R&D Systems, Minneapolis, Minn.). The L929 cytotoxicity assay was conducted as previously described (1). All stimulations were carried out in the presence of 5 µg of polymyxin B/ml unless otherwise noted. Bacterial LPS (E. coli O55:35; Sigma) was used as a positive control.
Adjuvant activity for humoral immune response. Forty 6- to 8-week-old female BALB/c mice were randomly placed in eight groups of five mice and immunized as described in Table 1 (keyhole limpet hemocyanin [KLH]-2,4-dinitrophenol [DNP] was purchased from Pierce). Blood was collected from the tail 3 days prior to primary immunization. Antigen and adjuvant were mixed by repeated aspiration through an 18-gauge needle attached to a 3-ml syringe. Each mouse was immunized intraperitoneally (i.p.) with 200 µl (total volume) of adjuvant and antigen. Mice were boosted i.p. after 28 days, and blood was taken every 3 days after boost until day 21 postboost and then again at 6, 9, and 12 weeks. The total DNP-specific antibody titer was determined by ELISA. Briefly, 5 µg of bovine serum albumin-DNP/ml in 0.05 M carbonate buffer, pH 9.5, was used to coat microtiter plates for capture of DNP-specific antibodies, while horseradish peroxidase-conjugated goat anti-mouse immunoglobulin G (IgG; heavy plus light chains; Bio-Rad) was used as a detection antibody. 3,3',5,5'-Tetramethylbenzidine liquid substrate (Sigma, St. Louis, Mo.) was used as a detection reagent; color development was stopped with 2 N H2SO4, and absorbance was read at 450 nm.
|
View this table: [in a new window] |
TABLE 1. Immunization protocol
|
|
|
|---|
![]() View larger version (25K): [in a new window] |
FIG. 1. Primary macrophages (A) and RAW 264.7 cells (B) were stimulated with crude emulsan (EM) (solid bars) or apoemulsan (open bars) isolated from the A. calcoaceticus RAG-1 parent strain fed on minimal medium and ethanol. TNF release was determined by the L929 bioassay. Control, nonstimulated cells; 100 ng/ml LPS, bacterial lipopolysaccharides. Error bars indicate standard errors of the means.
|
|
View this table: [in a new window] |
TABLE 2. Fatty acid compositions and polysaccharide molecular weights of emulsan variants produced by mutant A. calcoaceticus RAG-1 strains
|
![]() View larger version (38K): [in a new window] |
FIG. 2. RAW 264.7 cells were stimulated with 200 (solid bars) or 20 (open bars) ng of several emulsan variants/ml in 96-well tissue culture plates, and TNF release was determined. Cultures were grown in LB bacterial media with or without fatty acids (1% [wt/vol]) of a specified carbon length (LB11, LB14, LB16, and LB18 are defined in Table 2). The bacterial strains are identified and the emulsan variants resulting from each culture condition are characterized in Table 2. The data are grouped to show the relationship of TNF release to culture conditions for a given bacterial strain (A to E) or to show the relationship of TNF release to bacterial strain under particular culture conditions (F to J). N.D., not done. Error bars indicate standard errors of the means.
|
![]() View larger version (33K): [in a new window] |
FIG. 3. TNF release data for stimulations with emulsan (EM) at 20 ng/ml (Fig. 2) were used to analyze the relationship of total fatty acid (FA) (A), total degree of substitution (B), and individual fatty acid content (C). Degree of substitution is defined as a ratio of fatty acid content in nanomoles to polysaccharide molecular weight (MW). A linear regression line is displayed for each data set.
|
Emulsan acts as an adjuvant. To test emulsan as an adjuvant, the ethanol-fed A. calcoaceticus RAG-1 emulsan before and after protein removal was used in a hapten carrier immunization protocol. Animals immunized with antigen in the presence of emulsan exhibited significantly higher DNP-specific antibody titers over the course of 12 weeks than those animals immunized with antigen alone. This heightened humoral response was similar to that achieved with the complete Freund's adjuvant (CFA)-incomplete Freund's adjuvant (IFA) combination (Fig. 4A).
![]() View larger version (38K): [in a new window] |
FIG. 4. (A) DNP-specific antibody titers for female BALB/c mice immunized with DNP-KLH, with emulsan (EM) as the adjuvant, as described in Table 1. The relative antibody titers indicated represent the dilutions at which absorbance was twice baseline (i.e., 0 represents a 1/100 dilution, 1 represents a 1/500 dilution, 2 represents a 1/2,500, etc.). PBS, phosphate-buffered saline; ApoEM, apoemulsan. (B) DNP-specific IgG1 (solid bars) and IgG2a (open bars) antibody titers were determined from antiserum collected at 9 days postboost. Results were normalized to the titers of antigen (Ag)-alone controls and presented as a fold increases over those for control animals. Error bars indicate standard errors of the means.
|
Animals used in these immunizations demonstrated no evidence of toxicity from emulsan during the course of these experiments. Mice were injected twice with as much as 200 µg of crude emulsan or apoemulsan without any obvious changes in behavior or survival.
|
|
|---|
During the process of purifying emulsan, contaminating protein may copurify at a weight percent as high as 16.4% (12). To eliminate the possibility that the macrophage activation could be due to the contaminating protein rather than the emulsan itself, preparations of emulsan that had been extracted with hot phenol to remove the protein were used to stimulate macrophages. There was no significant difference in the levels of macrophage activation by the crude emulsan and apoemulsan preparations. This result leads to the conclusion that the macrophage activation induced by emulsan is independent of the contaminating protein.
Emulsan has two main components, the polysaccharide backbone and the fatty acid side chains. To determine the relative contribution of each of these components to macrophage activation, emulsan from ethanol-fed A. calcoaceticus RAG-1 was stripped of its fatty acid side chains and then assayed for its ability to induce TNF release. Deacylation resulted in a complete inhibition of macrophage activation. Because the fatty acid component is critical to macrophage activation, we explored the relationship between fatty acid composition and macrophage activation. We have generated several A. calcoaceticus RAG-1 mutants (12; W. Blank and D. Kaplan, submitted for publication), which produce variant forms of emulsan. The overall amount of fatty acid decorating the emulsan polysaccharide backbone and also the identities of the side chains in these mutants are affected. It was also observed that the fatty acid content and identity could be manipulated simply by changing the carbon source provided to the mutant and parent strains. The results of macrophage activation assays with these emulsan variants demonstrate that the changes in composition lead also to differences in the macrophage-activating capabilities of the emulsan variants. Analysis of these data suggests that individual fatty acids may be identified as either stimulatory or inhibitory with regard to macrophage activation. This was most striking with the 10 emulsan variants that contained the C12, 2-OH side chain, in which the higher content of this fatty acid was correlated with diminished macrophage activation (Fig. 3C). However, it is likely that more-subtle structural properties, such as the clustering of particular side chains and the order of individual side chains, may be very important in recognition of these acylated polysaccharides by the macrophage.
The combination of emulsan's ability to stimulate macrophages and its natural emulsifying properties led to the intriguing possibility that it could act as an adjuvant. The data presented here demonstrate its effectiveness in enhancing humoral immunity. Over the course of more than 130 days, mice immunized against an antigen in the presence of emulsan had antigen-specific antibody titers more than100-fold higher than those in mice immunized with antigen alone. This increase in antibody titer was equivalent to that seen with CFA. The high antigen-specific titer supports emulsan's future use as an adjuvant.
The nature of the immune response potentiated by emulsan was examined for its relative T-helper-subtype contribution. This was assessed by determining the relative amounts of antigen-specific IgG1 and IgG2a induced in the immunized animals. The predominance of IgG2a in the emulsan-induced response contrasts with the profile induced by alum, the only adjuvant currently approved for human use. Alum induces Th2-type responses with IgG1-restricted isotype profiles. Cytokine analysis will be necessary to determine whether emulsan elicits a Th1-type response, as suggested by the isotype profile (23).
The variability in the structure of emulsan with regard to its fatty acid composition presents a powerful system to fine tune its adjuvant activity. The data presented here indicate that the quantity and identity of a given side chain can affect the ability of that particular emulsan variant to activate macrophages. In vivo studies with several variants may correlate differences in structure and adjuvant activity.
While several questions remain to be answered with regard to the mechanism of emulsan-induced immune activation, it is clear that the combination of amenability to structural tailoring and emulsification properties of the emulsan variants presents a powerful system to examine structure-function relationships with regard to immune activation and adjuvanticity.
We acknowledge technical assistance by Arthur Trapotsis, H. Himanshu, and A. Weyersgraf at various stages of the work.
Present address: Charles River Laboratories, Andover, Mass. ![]()
|
|
|---|
and B-cell stimulatory factor 1 reciprocally regulate Ig isotype production. Science 236:944-947.
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»