Previous Article | Next Article ![]()
Clinical and Vaccine Immunology, June 2007, p. 789-791, Vol. 14, No. 6
1071-412X/07/$08.00+0 doi:10.1128/CVI.00082-07
Copyright © 2007, American Society for Microbiology. All Rights Reserved.

Departments of Microbiology,1 Surgery,2 Medicine, University of Mississippi Medical Center, Jackson, Mississippi 39216,3 Department of Pharmaceutics, The University of Mississippi, University, Mississippi 386774
Received 14 February 2007/ Returned for modification 27 March 2007/ Accepted 17 April 2007
|
|
|---|
|
|
|---|
Pneumococcal surface proteins that are important in physiology or pathogenesis represent potential vaccine components as well as targets for new classes of therapeutic agents (16). Pneumococcal surface protein A, PspA, is one of the best characterized of these proteins. PspA elicits protective immunity in mice against pneumococcal challenge (2), and antibodies from humans vaccinated with PspA passively protect mice against infection (3).
We used this well-characterized mouse model of protective immune response to examine the ability of a poly(ethylene oxide) matrix to deliver antigen and modulate the immune response. The matrix represents a novel delivery system that can augment the immune response and does not require an injection. This system will likely lead to broader acceptance of vaccines. As proof of concept, the matrix containing PspA was implanted subcutaneously in mice for direct comparison to subcutaneous injection of the antigen.
Bacterial strains and growth conditions. S. pneumoniae WU2, which was used to challenge mice, was grown in Todd-Hewitt broth with 0.5% yeast extract at 37°C. Serial dilutions were performed to determine the CFU of the pneumococci by plating on blood agar and incubating at 37°C under reduced-oxygen conditions.
Statistical analysis. Data were compared by analysis of variance with Tukey's correction for multiple comparisons and Student's unpaired t test (GraphPad InStat). P values of <0.05 were considered significant.
Immunization with PspA incorporated into a poly(ethylene oxide) matrix. Recombinant PspA (rPspA) used in this study was derived from the nonencapsulated strain Rx1 and purified as previously described (21). rPspA/Rx1 was incorporated into hot-melt extrusion matrices composed of poly(ethylene oxide). This process has been shown to be a viable technique for delivery of drugs (20). A volume of polymer slurry was mixed with 500 µg of rPspA/Rx1 such that a 5-mm disk of the final material would contain approximately 30 µg of rPspA/Rx1 using an extruder that produced a single sheet or film of polymerized matrix. During the extrusion process, the film reached a maximum temperature of 90°C for approximately 30 seconds. PspA has been shown to be a very stable protein that can tolerate exposure to heat (14). The films were processed into 5-mm-diameter disks. The disks were evaluated postextrusion for PspA content, physical uniformity, and dissolution rate. The disks containing PspA and bovine serum albumin (BSA) were dissolved in water for 30 minutes and then loaded on the gel. Western blot analysis of the rPspA incorporation in the matrix was performed as previously described (18). The matrix was proven not to inhibit PspA interaction with an anti-PspA monoclonal antibody. By Western blot analysis, PspA is detected in the matrix as a diffused pattern due to the incorporation in the poly(ethylene oxide) matrix, which did not retard the monoclonal antibody's accessibility to the protein (Fig. 1).
![]() View larger version (31K): [in a new window] |
FIG. 1. Immunoblot analysis of PspA incorporated in the matrix. The disks containing PspA (lane 1) and BSA (lane 2) dissolved in water were reacted with XiR278 (anti-PspA monoclonal antibody) in the Western blot. The lane with PspA in the disk shows a diffused pattern due to the incorporation in the poly(ethylene oxide) matrix. Purified rPspA/Rx1 (5 µg) in lane 3 served as a positive control.
|
All of the mice that received PspA with alum or in the matrix survived a lethal pneumococcal challenge compared to the control mice, none of whom survived (Table 1). Serum PspA-specific immunoglobulin levels were determined by enzyme-linked immunosorbent assay (ELISA) as previously described (2). ELISA results revealed that the level of serum anti-PspA antibodies for mice immunized with PspA in the matrix was 554.69 ± 183.23 µg/ml, which was not statistically different from the anti-PspA level in mice immunized with PspA on alum, 1,042.22 ± 281.81 µg/ml (Fig. 2). Interestingly, the level of anti-PspA antibodies elicited by PspA in the matrix was statistically higher than the level of anti-PspA antibodies in mice receiving PspA without adjuvant, which elicited 10.99 ± 4.26 µg/ml (P < 0.009). Our data demonstrated that the delivery of PspA via the laminated film results in a significant increase in antibody responses.
|
View this table: [in a new window] |
TABLE 1. Survival of mice following challenge with S. pneumoniae WU2a
|
![]() View larger version (5K): [in a new window] |
FIG. 2. Anti-PspA responses of CBA/N mice immunized with PspA. Sera collected on day 21 were assayed for anti-PspA antibodies. Mice that were immunized with the matrix containing PspA had significantly higher antibody responses than mice receiving PspA injected subcutaneously. *, P < 0.006 for mice immunized with PspA on alum (1,042.22 ± 281.81 µg/ml) versus PspA; **, P < 0.009 for mice immunized with PspA in matrix (554.69 ± 183.23 µg/ml) versus PspA (10.99 ± 4.26 µg/ml).
|
![]() View larger version (16K): [in a new window] |
FIG. 3. Immunoblot of pneumococcal cell lysates reacted with immune serum from CBA/N mice immunized with PspA in matrix. Five micrograms of total protein of whole-cell lysates was loaded into each well. Purified rPspA/Rx1 (5 µg) served as a positive control. The superscript numbers represent the PspA clade of the pneumococcal strain. The blot represents PspA family 1, clades 1 and 2, and PspA family 2, clades 3 to 5.
|
In this study, we investigated the ability of a matrix containing PspA delivered subcutaneously to elicit protection against fatal pneumococcal challenge. Our results demonstrated that films implanted subcutaneously in mice can elicit protective immune responses. Immunization with PspA in the lactated Ringer's solution demonstrated the ability to elicit a specific immune response. Previous studies in our laboratory have established that minimal levels of anti-PspA antibodies are sufficient for protection against pneumococcal challenge (2). Immunization of mice using PspA with adjuvant has repeatedly been demonstrated to be very effective in eliciting protection (3-5, 9, 13, 15, 17). The poly(ethylene oxide) matrix used both serves as a potential delivery system and offers adjuvant characteristics. This study demonstrates the adjuvant effects of the matrix on the immune response and the resultant protection from a lethal pneumococcal challenge. This shows that PspA in the matrix is recognized by the immune system and that the immune response is similar to that in mice immunized with PspA on alum and is not a local response.
The laminated-film system has been used to study the prophylaxis and treatment of oral candidiasis by incorporating clotrimazole in the film system and the delivery of dental analgesia such as lidocaine (19, 20). To our knowledge, this study is the first to investigate the efficacy of pneumococcal immunization via a laminated-film system. Further development of this immunization model would allow for the evaluation of the mucosal immune response against carriage and systemic pneumococcal infections. Results from these studies will advance the development of an effective transmucosal delivery system against bacterial infections.
Published ahead of print on 25 April 2007. ![]()
|
|
|---|
-helical domain of PspA elicits protective immunity against Streptococcus pneumoniae. Infect. Immun. 69:5456-5463.
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»