Previous Article | Next Article ![]()
Clinical and Vaccine Immunology, September 2006, p. 1004-1009, Vol. 13, No. 9
1071-412X/06/$08.00+0 doi:10.1128/CVI.00112-06
Copyright © 2006, American Society for Microbiology. All Rights Reserved.
Departments of Pathology,1 Microbiology, University of Alabama at Birmingham, Birmingham, Alabama2
Received 23 March 2006/ Returned for modification 31 May 2006/ Accepted 12 July 2006
|
|
|---|
6%) results differed more than twofold, the differences were not reproducible. The assay was specific: preabsorbing test sera with homologous polysaccharide (PS) completely abrogated opsonic activity, but a pool of unrelated PS (5 µg/ml of each) had no effect. Intra- and interassay coefficients of variation were 10 and 22%, respectively. MOPA4 results were unaffected by having different target pneumococcal serotypes in each assay group. Also, HL60 cell-to-bacteria ratios could be varied twofold without affecting the results. We conclude that MOPA4 is sensitive, accurate, specific, precise, and robust enough for large-scale clinical studies. Furthermore, MOPA4 should allow evaluation of multivalent pneumococcal vaccines with the limited volume of serum typically available from young children. |
|
|---|
The development or improvement of pneumococcal vaccines requires measuring their immunogenicity, determined primarily by measuring anticapsular PS antibody levels with the use of enzyme-linked immunosorbent assay (ELISA). Use of the pneumococcal antibody ELISA has established that an antibody level of 0.35 µg/ml is associated with protection from invasive pneumococcal infections in children (7). However, old adults generally have more than 0.35 µg/ml of pneumococcal antibodies and yet are susceptible to pneumococcal infections (16, 19). Thus, old adults may have nonfunctional pneumococcal antibodies (18), and ELISA for pneumococcal antibodies may be inadequate to accurately measure immunogenicity of pneumococcal vaccines in the elderly. It is preferable to measure the protective capacity of pneumococcal antibodies directly.
Since antibodies to pneumococcal capsular PS protect the host by opsonizing pneumococci for phagocytes, the opsonophagocytic killing assay (OPA) has been widely accepted as the reference method for measuring the protective capacity of pneumococcal antibodies (16). Because pneumococcal vaccines contain many (7 to 23) serotypes, a comprehensive evaluation requires many OPAs to be performed. Since many vaccine studies involve infants, only a small amount of serum is available for such analyses. To overcome these limitations, we have demonstrated the feasibility of a multiplexed OPA with antibiotic-resistant pneumococci as target bacteria (9, 11). To help meet the need for a practical assay useful for large-scale pneumococcal vaccine evaluations, we have now developed, optimized, and validated a fourfold multiplexed OPA (MOPA4) for 13 serotypes.
|
|
|---|
|
View this table: [in a new window] |
TABLE 1. Bacteria strain composition of opsonization assay groups and their antibiotic resistance
|
Phagocytes. HL60 cells were originally obtained from ATCC (catalog no. CCL-240, lot no. 3346359; Manassas, VA) and were cryopreserved (5). An aliquot of HL60 cells was thawed and propagated up to 6 months in culture medium (CM), consisting of RPMI 1640 with 10% fetal bovine serum (FBS) (Fetalclone I; HyClone, Logan, UT) and 1% L-glutamine. To obtain phagocytes for the OPA, HL60 cells were differentiated for 5 to 6 days in CM with 0.8% dimethyl formamide at a starting density of 4 x 105 cells/ml.
Serum samples. Pool 18 was prepared by mixing sera from three adult donors who were vaccinated with a 23-valent PS vaccine. Pool 20 was prepared from equal volumes of 180 elderly individuals who had been vaccinated with either a PPV23 (Merck, West Point, PA) or 9-valent conjugate vaccine (Wyeth Vaccines, Rochester, NY). Pool 22 was made by pooling two outdated plasma samples from a blood bank and converting the pool to serum using thromboplastin. Thirty single-donor serum samples used throughout this study were obtained from old adults (more than 65 years old). Five of these sera were obtained prevaccination, and the remainders were collected 4 months after vaccination with a PPV23. All serum samples and pools contained no antibiotics, as judged by their inability to inhibit growth of a rough strain of pneumococcus (R36A). The serum samples were collected and used following the guidelines approved by the institutional review board.
Rabbit complement. Several lots of complement from 3- to 4-week-old rabbits (PelFreeze Biologicals, Rogers, Arkansas) were tested for opsonophagocytic killing of the 13 strains in the absence of human sera (see Results) using the MOPA4 procedure described below. Lots demonstrating less than 30% nonspecific killing were selected.
OPA.
All serum samples were incubated at 56°C for 30 min before serial dilutions. Serially diluted serum samples (20 µl/well) were tested in duplicate in round-bottom 96-well plates (Corning Inc., Corning, NY). Eleven 2.3-fold serial dilutions were used for interassay variability experiments, and eight threefold dilutions were used for all other experiments. Frozen aliquots of target pneumococci were thawed, washed twice (unless otherwise indicated) with opsonization buffer B (Hanks' balanced salt solution [HBSS] with Mg and Ca, 0.1% gelatin, and 10% FBS) by centrifugation (12,000 x g, 2 min), and diluted to the proper bacterial density (
105 CFU/ml for single-serotype assays and
2 x 105 CFU/ml of each serotype for multiplexed assays). For MOPA4, equal volumes of four bacterial suspensions in one assay group were pooled. Ten microliters of bacterial suspension was added to each well.
After 30 min of incubation at room temperature, 10 µl of complement and 40 µl of HL60 cells were added to each well. HL60 cells were washed twice before use with HBSS by centrifugation (350 x g, 5 min), and 4 x 105 cells were added to each well (unless otherwise indicated). Plates were incubated in a tissue culture incubator (37°C, 5% CO2) with shaking (mini orbital shaker; Bellco Biotechnology, Vineland, NJ) at 700 rpm. After a 45-min incubation, plates were placed on ice for 10 to 15 min and an aliquot of the final reaction mixture (5 µl for single-serotype assays, 10 µl for all other assays) was spotted onto four different Todd-Hewitt broth-yeast extract (0.5%) agar plates for MOPA4 (9). After application of an overlay agar containing one of the four antibiotics to each Todd-Hewitt broth-yeast extract (0.5%) agar plate and overnight incubation at 37°C, the number of bacterial colonies in the agar plates was enumerated (9). Opsonization titers (OT) were defined as the serum dilution that kills 50% of bacteria (9). A detailed protocol is posted at a website (www.vaccine.uab.edu).
|
|
|---|
(ii) Assay optimization. To develop a reliable OPA, many analytical parameters were investigated and optimized. Various amounts of free capsular PS are present in target bacterial preparations, and the PS can function as a competitive inhibitor even at a very low concentration (<1 µg/ml) (6). We found that the washing of target bacteria reduced variability in assay sensitivity associated with using different preparations of target bacteria (data not shown). Hu et al. reported that assay plates for OPA required a unique shaking rate for each serotype (6). Since MOPA includes multiple serotypes simultaneously, one cannot employ serotype-specific shaking speeds. After investigating different shakers, we found that a shaker with a small shaking radius could produce comparable opsonization titers for all serotypes at shaking speeds from 650 to 800 rpm (data not shown). The shaker and 700 rpm were chosen for MOPA4.
A major difficulty in OPA is in nonspecific killing of pneumococci by rabbit serum that is used as a source of complement. For some serotypes, especially 6A, 6B, and 14, many lots of rabbit serum had a high level (
50%) of nonspecific killing (data not shown). Nonspecific killing was defined as 100 x [1 (CFU in wells containing rabbit serum and HL60)/(CFU in wells with bacteria alone)]. All CFU were determined at the end of the assay due to bacterial growth during the assay. Nonspecific killing was considerably reduced when the phagocytosis phase of the assay was performed in air containing 5% CO2 (data not shown). For all subsequent assays, the phagocytosis for phase was performed in air with 5% CO2.
(iii) Assay validation. (a) Specificity.
Once the assay conditions were optimized, we investigated assay specificity by neutralizing a serum pool with homologous PS (5 µg/ml), a pool of heterologous capsular PS (5 µg/ml of each), or with no PS before being tested in OPA (Fig. 1). Heterologous PS pools contained PS from all 13 serotypes, except for the homologous PS and PS from the same serogroup. For instance, the heterologous pool for 6B did not contain 6B and 6A PS but contained the remaining 11 PSs; for serotype 14, the heterologous PS pool contained 12 other PSs (all except for serotype 14). Evaluation was performed for all 13 serotypes using MOPA4, and two representative results are shown in Fig. 1. For serotype 14, the heterologous pool did not inhibit the opsonic capacity of the serum pool, but serotype 14 PS completely abrogated the opsonic capacity (upper panel). In the case of serotype 6B, opsonic activity was completely abrogated by 6B PS, reduced (
3-fold) by 6A PS, and unaffected by the heterologous PS mixture (lower panel). These data indicate that the multiplexed OPA is serotype specific.
![]() View larger version (16K): [in a new window] |
FIG. 1. Number of surviving bacteria (y axis) at various dilutions of serum (x axis). Serotype of pneumococci (Pn) was serotype 14 (top panel) or serotype 6B (bottom panel). For the top panel, the serum sample was absorbed with nothing (solid triangle), 5 µg/ml of serotype 14 PS (solid square), or a mixture of heterologous PS (open square). For the bottom panel, the serum sample was absorbed with nothing (solid triangle), 5 µg/ml of serotype 6B PS (solid square), 5 µg/ml of serotype 6A PS (symbol "X"), or a mixture of heterologous PS (open square). The heterologous PS pool had PS (5 µg/ml each) of all the unrelated serotypes, but PS of cross-reactive serotypes was omitted for serotypes 6A, 6B, 19A, and 19F. The cross-reactive PS was tested separately (also at 5 µg/ml). w/o, without.
|
![]() View larger version (25K): [in a new window] |
FIG. 2. Comparison of opsonization titers of 30 serum samples determined with MOPA4 (y axis) and with single-serotype OPA (SOPA) (x axis). Each panel contains an identity line (dotted line) and two lines indicating twofold deviation from identity (solid lines). The serotypes and the r2 values are indicated in each panel. In the bottom row of the panels, two panels show comparisons for serotype 7F. In run 1, six samples (open circles) showed a more-than-twofold deviation, but their results deviated less than twofold in run 2. In most panels, several samples had opsonization titers below the detection limit, which was 4. These samples were assigned an opsonization titer of 2, and the number of such serum samples is indicated in each panel. Pn, pneumococcal serotype.
|
50%) were observed with one sample (pool 22) but not with other samples. Pool 22 was made by converting plasma to serum, whereas all other samples were collected as serum. Thus, the high CVs may be associated with the sample (pool 22) itself rather than the assay. |
View this table: [in a new window] |
TABLE 2. Intra- and interassay precision of MOPA4a
|
![]() View larger version (32K): [in a new window] |
FIG. 3. Opsonization titers of one serum sample for 13 serotypes with the E:T ratio of 400:1 (hatched bars), 200:1 (open bars), 100:1 (gray bars), or 50:1 (black bars). Because serotype 3 is an odd member, it was tested in the single-serotype OPA format. All other serotypes were tested in MOPA4 format. Since opsonization titers for serotypes 6A, 9V, and 23F displayed a marked trend of decreasing opsonization titers with decreasing E:T ratios, the experiment was repeated for these three serotypes. This trend was not reproducible (data not shown).
|
|
|
|---|
MOPA4 was validated by investigating the assay's precision, accuracy, and specificity. Not surprisingly, the assay was found to be highly specific. Since no OPA standards with assigned values are currently available, we assessed the assay's accuracy by comparing MOPA4 results with those obtained with a single-serotype OPA. Both assays were found to yield similar results, and deviations from the identity were less than twofold in most samples in our comparison studies. Although MOPA4 gave slightly higher results than the single-serotype OPA in serotype 7F for several samples with low titers, the difference was not reproducible. In the future, we plan to compare our MOPA4 with other single-serotype OPAs by studying samples from vaccinated children and exchanging samples with other laboratories that perform single-serotype OPAs.
Under our assay conditions, we found the MOPA4 to be precise, with an interassay CV of about 20%. Indeed, this level of CV is comparable to those observed for ELISA results (12). Since this is short-term interassay precision, assay precision would be reduced as the assay is performed for a longer period using different batches of bacteria and complement. Thus, we are investigating various approaches to improve precision further, such as the use of a standard serum for each assay and a data analysis program that would utilize data obtained at all serum dilutions. With these improvements, we believe that MOPA4 would become as precise as ELISA, even though MOPA4 is a bioassay.
It is difficult to demonstrate assay sensitivity, because there are no established OPA standards. Since most serum samples obtained after a vaccination have measurable opsonization titers, our MOPA4 appears to have adequate assay sensitivity. However, assay sensitivity may depend on target bacteria, since we observed up to 5- to 10-fold variation in the magnitude of opsonization titers when different target bacteria were used (unpublished observation). Interstrain variation may occur because strains produce different amounts of capsule, express different phases (8), or differ in the expression of molecules affecting complement deposition on the bacterial surface (13). Due to these considerations, a set of target strains of pneumococci should be adopted as the standard. We plan to make our antibiotic-resistant bacteria available to qualified investigators.
Since pneumococci are pathogens, the safety of using antibiotic-resistant pneumococci should be a concern. However, MOPA4 uses antibiotics that are not relevant to managing pneumococcal infections. Also, we used natural antibiotic resistance by pneumococci and did not insert "antibiotic resistance" genes which could be transferred to other bacteria. In addition, we used an overlay method which seals the pneumococci within the agar plate and prevents exposure of the pathogen to the air. In addition to reducing biohazard, we found the overlay kept the colony size of type 3 pneumococci small. In conventional OPA, because of their large colony size, type 3 pneumococci required large agar surfaces, and this caused significant practical problems. Although the antibiotics we used do not pose serious safety concerns, one may develop target bacterial strains that depend on specific nutrient factors. In this way, the multiplex assay can be performed without using antibiotics.
Because of its importance in pneumococcal vaccine development, various multiplexed opsonization assay formats have been developed (2, 9-11). While we have described here a killing-type multiplexed opsonization assay, Martinez et al. developed a flow-cytometric multiplexed opsonization assay (10). This approach uses, in place of target pneumococci, a mixture of latex particles that have distinct fluorescent characteristics and are coated with different capsular PSs. The particles are opsonized with antisera and complement, and their uptake into phagocytes is then determined with a flow cytometer. The flow-cytometric assay uses artificial targets instead of bacteria, measures phagocytosis but not actual killing, requires an expensive instrument, and requires more hands-on effort than the opsonophagocytic killing assay employing automated colony counting. Also, a killing-type multiplexed opsonization assay is similar to the conventional opsonization assay used as the reference assay in the past (17). Thus, multiplexed opsonophagocytic killing assays may be easier to adopt and validate than the multiplexed phagocytosis assay. Nevertheless, these multiplexed opsonization assays may be robust and rapid enough to replace pneumococcal antibody ELISA, which may not be specific for functional antibodies (1, 18, 22).
|
|
|---|
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»