Previous Article | Next Article ![]()
Clinical and Diagnostic Laboratory Immunology, July 2004, p. 752-757, Vol. 11, No. 4
1071-412X/04/$08.00+0 DOI: 10.1128/CDLI.11.4.752-757.2004
Copyright © 2004, American Society for Microbiology. All Rights Reserved.
Faculty of Pharmacy and Pharmaceutical Sciences,1 Department of Medical Microbiology & Immunology, Faculty of Medicine, University of Alberta, Edmonton, Alberta, Canada T6G 2N82
Received 25 August 2003/ Returned for modification 24 November 2003/ Accepted 14 March 2004
|
|
|---|
|
|
|---|
One of the present methods for the diagnosis of B. pertussis infection is a direct fluorescent-antibody assay that uses a fluorescence-labeled monoclonal antibody (MAb) directed against the lipopolysaccharide (LPS) in the outer membrane of the bacterium (14). Unlike many other bacteria, B. pertussis produces one predominant antigenic type of LPS molecule (17), making it a good specific target for immunodiagnosis. Like other endotoxins, B. pertussis LPS is a durable molecule that can easily withstand the conditions encountered during handling and transport. The detection of antibody to LPS is a good strategy for the diagnosis of B. pertussis infection, but the method could be improved to make it easier to use and a more sensitive reagent is needed (20).
Here we report on the development and characterization of a bispecific MAb (bsMAb) against horseradish peroxidase (HRPO) and B. pertussis LPS that could be used for enzyme-based detection of soluble LPS antigen and whole B. pertussis bacteria in clinical samples, immunochemical structural studies, and serological characterization of B. pertussis LPS, with some potential advantage over present MAb- or polyclonal antibody-labeled immunoassays. In particular, we observed the ultrasensitive detection of B. pertussis by use of the molecular "velcro" assay concept.
|
|
|---|
Cell lines. Murine hybridoma cell line 1H2, which recognizes the terminal trisaccharide of B. pertussis LPS, was developed by two of us (M.S.P. and R.T.I.) to produce a commercial diagnostic assay (AccuMab; Altachem Pharma Ltd., Edmonton, Alberta, Canada). The 1H2 hybridoma was subcloned to obtain 1H2P4, a mouse hybridoma secreting an immunoglobulin G1 (IgG1) anti-B. pertussis LPS MAb.
YP4, a rat hybridoma producing an IgG2a anti-HRPO MAb, was a gift of the late C. Milstein, Laboratory of Molecular Biology, Medical Research Council, Cambridge, United Kingdom.
Quadroma generation. (i) Cell labeling. The first parental hybridoma, 1H2P4 (anti-B. pertussis LPS), was labeled with tetramethyl rhodamine isocyanate (TRITC [red fluorescence]; Sigma, St. Louis, Mo.); and the second hybridoma, YP4 (anti-HRPO), was labeled with fluorescein isothiocyanate (FITC [green fluorescence]; Sigma). The cell-labeling protocol was similar to one described previously (12), with some modifications. Approximately 2 x 107 cells (viability, >90%) of the 1H2P4 hybridoma and 2 x 107 cells (viability, >95%) of the YP4 hybridoma were washed three times with serum-free Dulbecco modified Eagle medium (DMEM; Gibco BRL, Gaithersburg, Md.) (SFDMEM). 1H2P4 cells were labeled with freshly prepared TRITC solution (2 µg/ml in SFDMEM [pH 7.4]). YP4 cells were labeled with FITC solution (1 µg/ml in SFDMEM [pH 6.8]). The cells were incubated with their respective fluorescence dyes for 15 min at 37°C to label surface NH2 groups and were washed three times with SFDMEM.
(ii) PEG fusion. Approximately 2 x 106 cells from the FITC-labeled YP4 hybridoma were mixed with the same number of cells from the TRITC-labeled 1H2P4 hybridoma, and 250 µl of polyethylene glycol (PEG) solution (Sigma) was added to the cell suspension. Following a 2-min incubation at 37°C, the cells were pelleted by centrifugation (500 x g for 5 min at 37°C), the supernatant was decanted, and the cells were resuspended in 15 ml of DMEM with 20% fetal bovine serum (FBS). After the mixture was washed three times, the fused cells were resuspended in 5 ml of DMEM with 20% FBS, transferred to a 25-cm2 tissue culture flask, and incubated for 1 h at 37°C in an atmosphere containing 5% CO2.
(iii) Fluorescence-activated cell sorter (FACS) analysis. Flow cytometric experiments were performed with an Epics Elite cell sorter from the Coulter Corporation (Hialeah, Fla.). Cells with dual fluorescence were sorted at two cells per well in a 96-well tissue culture plate with DMEM-20% FBS. The plate was then incubated at 37°C with 5% CO2. Screening of the quadroma fusion supernatants was performed after 10 days of culture by a direct enzyme-linked immunosorbent assay (ELISA), as described below. The stronger positive clones were then selected and subcloned by the limiting dilution method three successive times to obtain the best quadroma, termed P123.
Screening method to detect quadromas secreting bsMAb (bridge ELISA). A direct ELISA was used for all screening procedures. Microtiter plates (Nunc, Roskilde, Denmark) were coated with purified B. pertussis LPS at 3 µg/well or whole bacteria at 108 CFU per well for 4 h at 37°C and overnight at 22°C, respectively. The remaining binding sites were blocked with 200 µl of 1% (wt/vol) bovine serum albumin (BSA) in 10 mM phosphate-buffered saline (PBS; pH 7.2) (PBS-BSA) at 37°C for 1 h, and the plates were washed three times with PBS-0.05% Tween 20 (PBS-T). A 100-µl aliquot of various quadroma cell culture supernatants was serially diluted with PBS-BSA, 50 µl of 10 µg of HRPO per ml was added to each well, and the plate was incubated for 1 h at 37°C. The plates were washed three times with PBS-T. Finally, 100 µl of tetramethylbenzidine (TMB; Kirkegaard & Perry Laboratories, Inc., Gaithersburg, Md.) substrate was added to the wells. Positive quadromas secreting bsMAb were selected after 15 to 45 min of color development, measured at 650 nm. This bridge ELISA measures only the activities of bsMAbs that bind to the solid phase with one paratope and to HRPO in solution with the other paratope. Monospecific antibodies are not detected by this assay since they do not cross-link the two different antigens.
Purification of monospecific MAbs. The anti-B. pertussis LPS MAb present in culture supernatants was purified by using the Affi-prep protein A MAPS preparative cartridge (Bio-Rad, Hercules, Calif.), according to the instructions of the manufacturer. The bound immunoglobulins were eluted at pH 4.5 and dialyzed with PBS (pH 7.2) with three changes of PBS.
Affinity cochromatography of HRPO-labeled bsMAbs. The affinity purification protocol was similar to one described previously (9, 11), with some slight modifications. The bsMAb supernatants from the quadroma cell lines were precipitated with solid ammonium sulfate to 50% saturation and then dialyzed against phosphate buffer (pH 7.2). Approximately 150 mg of crude bsMAb along with 10 mg of HRPO (dissolved in phosphate buffer [pH 7.0]) was incubated for 20 min at 37°C and loaded onto a column (1.25 by 30 cm) containing 15 ml of benzhydroxamic acid-agarose (BHA) matrix. The column flow rate was 20 ml/h. The column was washed with approximately six times the column volume of phosphate buffer, and the bound proteins were eluted as a preformed HRPO-bsMAb complex in 2-ml fractions with 0.1 M borate buffer [pH 9.0]. The bsMAb fractions were tested for activity by ELISA on an LPS-coated plate. Active fractions were pooled and dialyzed against PBS (pH 7.2).
Homosandwich molecular velcro ELISA. The two-step homosandwich ELISA was performed with 96-well microtiter plates (Nunc). The wells were coated overnight at 4°C with purified anti-B. pertussis LPS monospecific MAb (1.5 µg/ml, 100 µl/well) in 50 mM carbonate buffer (pH 9.6). The remaining binding sites were blocked with 200 µl of 1% BSA by incubation for 30 min at 37°C. After the plate was washed with 0.05% (vol/vol) PBS-T (pH 7.2), 100 µl of heat-killed B. pertussis whole bacteria serially diluted in PBS was added, and the mixture was incubated for 1 h at 37°C. The plates were washed and incubated with 100 µl of HRPO-labeled bsMAb in 1% BSA for 1 h at 37°C. Even though two structurally different MAbs were used, we consider this a homosandwich ELISA because, functionally, the same LPS paratope is involved in the formation of the sandwich. The molecular velcro effect represents the almost irreversible binding of the ternary complex to the solid phase, as described in the Results section. TMB substrate was added after the final wash, and readings were taken at 650 nm. In order to observe the molecular velcro effect of the two steps of the molecular velcro ELISA, we initially coated the bivalent MAb on the microtiter plate and added B. pertussis, incubated the mixture for 1 h, and then washed the mixture 1 to 16 times with PBS-T. The bound bacteria were detected directly by the bsMAbs following three subsequent washes with PBS-T. Similarly, bsMAb binding to the B. pertussis organisms directly coated on the polystyrene microtiter plate (instead of an MAb-coated plate) at 107 CFU/well was studied. Again, the plate was washed 1 to 16 times before measurement of the ELISA activity.
Immunoswab assays. A nasopharyngeal type 1 Dacroswab and a Calgiswab (Spectrum Labs, Houston, Tex.) on a flexible aluminum shaft were used in a simulated immunoswab assay. The swabs were spiked with different amounts of B. pertussis in 20 µl of PBS, dried at room temperature for 5 min, fixed with 20 µl of 95% ethanol for 5 min, and finally blocked with 25 µl of 5% BSA in PBS for 5 min. Control swabs were processed in a similar fashion, but without the addition of the bacteria. The control and test swabs were incubated with 50 µl of the HRPO-bsMAb complex for 15 min in an Eppendorf tube. The swabs were finally washed extensively with 0.05% BSA-PBS eight times by use of simple fill-and-aspiration steps. The final wash included a centrifugation step to remove any residual fluid. The TMB substrate (100 µl) was added, and the development of the blue color on the swab tip was monitored.
A modification of the direct detection procedure described above was tested, in which the fresh swabs were coated with 10 µl of the 1H2 MAb per ml to capture the bacteria in the first step, as in a homosandwich assay. Following a blocking step with 5% BSA-PBS, the rest of the steps were the same as described above.
|
|
|---|
![]() View larger version (25K): [in a new window] |
FIG. 1. FACS analysis after PEG fusion of the two fluorescent hybridomas. The dot plot analysis performed after PEG fusion shows the number of double-fluorescent cells (area E). The double-positive cells from area E were initially sorted at two cells per well.
|
|
View this table: [in a new window] |
TABLE 1. Quadroma cell lines secreting bsMAb against B. pertussis and HRPO screening
|
15 µg of crude bsMAb per ml. Affinity purification of bsMAb-HRPO as a preformed complex was accomplished with the BHA column matrix, which is known to bind to HRPO (9). The crude HRPO-bsMAb mixture was loaded, and unbound proteins (especially monospecific anti-LPS) were removed by washing. The MAb-HRPO complex was eluted with borate buffer and was effectively resolved from the competing anti-LPS antibodies and contaminating proteins which were in the unbound fractions. The chromatographic profile of the bsMAb in the eluted fractions shows that the A280 peak was seen to correspond to the peak of bsMAb-HRPO complex activity (Fig. 3). The ELISA data show the copurification of the bsMAb- and HRPO enzyme-related activities in the eluted peak. Since the preformed bsMAb-HRPO complex has one free paratope, it can be conveniently detected on a B. pertussis-coated plate.
![]() View larger version (13K): [in a new window] |
FIG. 2. Optimum concentrations of crude bsMAb to HRPO (n = 3). B. pertussis bacterium-coated plates were incubated with crude bsMAb to measure the optimum concentration of HRPO needed to saturate the HRPO paratopes. The enzyme activity following three washes was measured at 650 nm.
|
![]() View larger version (44K): [in a new window] |
FIG. 3. Purification of HRPO-labeled bsMAb from a cell culture supernatant on a BHA column. The absorbance at 280 nm (Abs at A280) of each 2 ml of eluted fraction was measured. B. pertussis bacterium-coated plates were used to measure specifically only the HRPO-bsMAb activity (optical density, 650 nm). Diluted fractions (1:20) were used in the HRPO-bsMAb assay.
|
B. pertussis BP347 cultivated overnight in Stainer-Scholte medium was heat killed at 90°C for 30 min prior to assay. Bivalent monospecific MAb 1H2P4 was used as the capture antibody. Tenfold dilutions of B. pertussis bacteria at concentrations ranging from 1 to 107/well were tested to measure the sensitivity of the assay. HRPO-bsMAb (P123-2) was used as the tracer antibody at 1.5 µg/well. The incubation period with antigen was 1 h at 37°C. The homosandwich ELISA showed a high sensitivity, with practical detection of B. pertussis occurring at
5 CFU (Fig. 4). The extrapolated theoretical lower limit of detection was one bacterium by using the mean + 2 standard deviations (SDs) of 20 control assays without B. pertussis.
![]() View larger version (17K): [in a new window] |
FIG. 4. Detection of B. pertussis by the microplate molecular velcro assay with the homosandwich ELISA format. The plates were coated with 1H2P4 and detected with HRPO bsMAb P123-2. The points are the means of pentuplicate measurements of each point and SDs. (Inset) Detection of B. pertussis in the low range. These are essentially the same data shown outside the inset but more clearly show the counts from 0 to 20 CFU. All points for the bacteria are significantly different from the control values by Student's t test (P < 0.001).
|
20% was exhibited between turbidimetry and epifluorescence (data not shown). In our studies the heat-killed bacteria did not exhibit clumping or aggregation when they were observed by epifluorescence microscopy. To investigate the influence of matrix effects, we spiked the heat-killed bacteria into nasopharyngeal aspirates obtained from the University of Alberta Hospital. These clinical samples were obtained for analysis for respiratory syncytial virus and were used after heat inactivation. No significant matrix-related interference was observed. Immunoswab assays. In order to investigate the utility of the bsMAb-HRPO immunoconjugate for detection of the bacterium in a primary health care setting, we conducted a simulated immunoswab assay. Dacroswab and Calgiswab were spiked with bacteria in a minimum volume of fluid and fixed to ensure adherence of the bacteria to the tip of the swab. The simulated capture of the bacteria was accomplished either directly with the fibers or following coating with the monospecific MAb to facilitate the capture step. Subsequently, the assay was conducted by using bsMAb-HRPO, as outlined in Materials and Methods. In tests with the two formats and the two different types of swabs, we observed that the best results were achieved with direct adsorption on the Calgiswab. The data in Fig. 5 show that as few as 10 bacteria can be detected when the results were compared with those achieved with the controls. While the sensitivity of detection by the alternative monospecific MAb-coated format was equally good, the level of background color development was slightly higher (data not shown). Optimized development of the direct assay could allow the B. pertussis screen to be done in a family physician's office setting to monitor outbreaks of whooping cough.
![]() View larger version (10K): [in a new window] |
FIG. 5. Direct detection of B. pertussis on nasopharyngeal swabs spiked with B. pertussis. Calgiswabs were allowed to adsorb 20 µl of sample containing various amounts of B. pertussis in an Eppendorf tube at room temperature for 5 min and dried. The swabs were fixed with 20 µl of 95% ethanol at room temperature for 5 min and blocked with 5% BSA in PBS at room temperature for 5 min. The swabs were incubated with 50 µl of bsMAb-HRPO complex at 3 µg/ml for 15 min, washed eight times with 0.05% BSA in PBS, and centrifuged at 14,000 rpm (MSE Mistral 2000) for 20 s. TMB substrate (100 µl) was added to observe color development.
|
|
|
|---|
HRPO has been shown to bind to BHA at the HRPO active site (3), and the BHA agarose matrix that we used for affinity purification provided enhanced yields of antibodies complexed to HRPO, in which the active site is sterically available and remains functional (9). We have shown that this affinity cochromatography procedure can be adopted for HRPO and alkaline phosphatase, the most commonly used enzymes (6). The level of labeling of bsMAb antibodies with HRPO is potentially consistently one to one, which lessens batch-to-batch variation and increases overall reliability (13). Provided that the enzyme is available in excess, every molecule is uniformly labeled with HRPO. It is important that the concentration of crude bsMAb sample incubated with HRPO prior to the initiation of affinity cochromatography is optimal so that it also saturates and binds to the monospecific anti-HRPO MAb. Hence, this purification will also copurify monospecific antibodies directed toward HRPO. However, the copurified monospecific MAb and free excess HRPO should be of little concern, as they will not bind to the target antigen and will be eliminated in the subsequent washing steps.
Proper identification of bacteria in patients with suspected cases of whooping cough usually requires that clinical nasopharyngeal swab or nasopharyngeal aspirate samples be cultivated for 3 to 7 days (16). B. pertussis is a highly fastidious bacterium. The successful isolation of this organism depends on several factors, such as the proper collection of the sample from the respiratory tract, followed by transport of the specimens in freshly made transport medium or direct plating of the sample on freshly prepared Regan-Lowe or Bordet-Gengou agar plates (7). A sensitive and specific method for the rapid detection of B. pertussis infection is highly desirable. The molecular velcro sandwich ELISA presented in this study directly detected whole bacteria with a practical lower limit of detection of about five bacteria and a theoretical limit, obtained by extrapolation of the mean for 20 blanks and 2 SDs, of one bacterium. Translation of the diagnostic assay with bsMAb to spiked nasopharyngeal swab samples appears to show a lower limit of detection of 10 CFU, and the technique can easily be developed into a diagnostic assay for use at the point of care in the primary health care setting. However, it is recognized that interference by mucins and other agents is likely to reduce the sensitivity of detection shown with ideally spiked samples (Fig. 5). Direct examination of smears by the monoclonal fluorescent-antibody technique (14) is successful for the detection of B. pertussis, although rates of false-negative results as high as 50% have been reported (5, 20). Also, the use of UV microscopy is labor-intensive, and accuracy typically falters in times of large outbreaks, when it is needed the most (4). The use of a highly specific bsMAb lacking batch-to-batch variations in a simple ELISA may circumvent these problems. We emphasize that we merely derivatized well-established and widely used antibody 1H2, which is the main probe in the AccuMab kit. This kit is extensively used at present for clinical diagnostics. The bsMab retains the 1H2 binding arm and is expected to retain the specificity of the parental MAb. However, further studies with clinical isolates are needed to validate this.
Antibodies with enzyme tags are used extensively in biochemical and immunochemical applications. The enzyme tag is generally attached to an MAb or a polyclonal antibody by a covalent linker (8). This chemical cross-linking technique can be problematic because of variable and partial inactivation of either the enzyme or the antibody; competition from unreacted species, which results in a low specific activity; a decreased shelf life; and variations in the sizes and properties of the conjugate from one batch to the next (13, 15). Cross-linked large protein aggregates could also cause nonspecific binding, which would increase the noise in the assay. bsMAbs are bifunctionally engineered antibodies bearing two different antigen-binding sites in a single antibody molecule. The highest specific activity of the nanoprobe is, theoretically, one in which every molecule is uniformly bound to a signal moiety. With this in mind, use of our hybrid hybridoma (quadroma) has resulted in the production of a designer bsMAb nanoprobe that has one antigen-binding site capable of binding to B. pertussis LPS and the other capable of binding to an enzymatic marker (HRPO). The immunoprobe with an intrinsic enzyme marker-binding capability in every molecule can be used directly as a tracer in a simple immunoassay with a homosandwich molecular velcro assay format with a theoretical limit of detection that approaches one bacterium. A direct comparison of our new assay with quantitative PCR and the traditional culture method for B. pertussis diagnostics is in progress as a pilot clinical trial.
Thanks are also due to Sujatha Guttikonda for help in revising the manuscript.
The term "velcro" is a registered trademark of Velcro Group Corporation.
|
|
|---|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»